MATERIAL: Corrosion resistant steel A286 or Z6NCT25 or equivalent, heat treated for 27 - 41 HRC.

SURFACE TREATMENT: Silver plate 5µm min. on thread, counterbore and chamfers, in accordance with EN 2786.

CLASSIFICATION: 1100 MPa (at room temperature) / 650 °C.

THREAD: MJ in accordance with ISO 5855-2

TOLERANCES OF FORM AND POSITION: In accordance with ISO 8788.

MARKING: EN 4118-ø-SD in accordance with EN 2424-Category A on the area indicated on the drawing.

QUALIFICATION AND ACCEPTANCE CONDITIONS: EN 3004.

Contact Alcoa for the diameter/type in manufacturing.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

A - MAX

B - MIN

D - MAX

D - MIN

H - MAX

K - MAX

S - MIN

Weight

Thread

5080 DHE7-13CM N/A 9.100 mm N/A 8.300 mm N/A 5.800 mm N/A 5.200 mm N/A 7.000 mm N/A 4.900 mm N/A 2.000 mm N/A 0.160 Kg/100 Pcs N/A MJ5 x 0.8 - 4H6H
6100 DHE7-13CM N/A 10.600 mm N/A 9.800 mm N/A 7.100 mm N/A 6.300 mm N/A 8.100 mm N/A 5.500 mm N/A 2.300 mm N/A 0.230 Kg/100 Pcs N/A MJ6 x 1 - 4H5H
7100 DHE7-13CM N/A 12.100 mm N/A 11.300 mm N/A 8.100 mm N/A 7.300 mm N/A 9.100 mm N/A 6.100 mm N/A 2.600 mm N/A 0.320 Kg/100 Pcs N/A MJ7 x 1 - 4H5H
8100 DHE7-13CM N/A 13.600 mm N/A 12.800 mm N/A 9.100 mm N/A 8.300 mm N/A 10.400 mm N/A 6.900 mm N/A 2.800 mm N/A 0.430 Kg/100 Pcs N/A MJ8 x 1 - 4H5H
10125 DHE7-13CM N/A 16.800 mm N/A 15.800 mm N/A 11.100 mm N/A 10.300 mm N/A 13.000 mm N/A 8.800 mm N/A 3.100 mm N/A 0.770 Kg/100 Pcs N/A MJ10 x 1.25 - 4H5H
12125 DHE7-13CM N/A 19.900 mm N/A 18.800 mm N/A 13.100 mm N/A 12.300 mm N/A 15.000 mm N/A 10.100 mm N/A 3.500 mm N/A 1.460 Kg/100 Pcs N/A MJ12 x 1.25 - 4H5H
14150 DHE7-13CM N/A 23.000 mm N/A 21.900 mm N/A 15.200 mm N/A 14.400 mm N/A 17.500 mm N/A 12.600 mm N/A 4.000 mm N/A 1.980 Kg/100 Pcs N/A MJ14 x 1.5 - 4H5H
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1