MATERIAL: Clip - 1050 Steel per AMS5085
Nut - 1050 Steel per AMS5085 or 4037 per AMS6300
HEAT TREAT: Clip - Hardened per MIL-H-6875 Except AUSTEMPERED, 48-51 HRC
NUT - To Meet Performance Requirements of NASM 25027, 46 MAX. HRC.
FINISH: Clip - Cadmium Plate, QQ-P-416, Type II, Class 1
Nut - Cadmium Plate, QQ-P-416, Type II, Class 2.
LUBRICATION: Nut - Solid Film Lubricant per MIL-L-46010, Type I Meeting the Requirements of NASM 25027
THREADS: MIL-S-8879 (Prior to Addition of Dry Film Lubricant)
PERFORMANCE: Nut Element Conforms to NASM 25027

Tolerance unless otherwise specified .XX ±.03, .XXX ±.010, Angles ±1/2°
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Edge Distance

Panel Thickness Range

Thread Size MIL-S-8879

A Max

A Min

Weight per 100

RC500-8-08 N/A 0.500 in N/A 0.020-0.160 in N/A 0.1640-32 UNJC-3B N/A 0.530 in N/A 0.510 in N/A 0.46 lb
RC500-10-08 N/A 0.625 in N/A 0.020-0.160 in N/A 0.1640-32 UNJC-3B N/A 0.675 in N/A 0.655 in N/A 0.51 lb
RC500-8-3 N/A 0.500 in N/A 0.020-0.160 in N/A 0.1900-32 UNJF-3B N/A 0.530 in N/A 0.510 in N/A 0.47 lb
RC500-10-3 N/A 0.625 in N/A 0.020-0.160 in N/A 0.1900-32 UNJF-3B N/A 0.675 in N/A 0.655 in N/A 0.52 lb
RC500-10G-3 N/A 0.625 in N/A 0.020-0.160 in N/A 0.1900-32 UNJF-3B N/A 0.675 in N/A 0.655 in N/A 0.52 lb
RC500-8G-3 N/A 0.500 in N/A 0.020-0.160 in N/A 0.1900-32 UNJF-3B N/A 0.530 in N/A 0.510 in N/A 0.47 lb
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1