MATERIAL: Alloy steel heat treated for 40 / 43 HRC.

SURFACE TREATMENT: Cadmium plate 5µm mini in accordance with EN 2133 + dry film lubricant according to EN 2491.

CLASSIFICATION: 900 MPa (at ambient temperature) / 235 °C.

THREAD:
  • PROFILE: ISO M in accordance with NF L 05-220 or AICMA 0501A.
  • TOLERANCES: in accordance with NF L 05-224 or AICMA 2011A.
TOLERANCES OF FORM AND POSITION: In accordance with ISO 8788.

MARKING: SD- in accordance with NF L 22-036 on the area indicated on the drawing.

QUALIFICATION AND ACCEPTANCE CONDITIONS : NF L 22-500 or AICMA 2053.

Contact Alcoa for the diameter/type in manufacturing.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

A - MAX

B ±0.1

C ±0.2

E

F ±0.1

G

H - MAX

J +0.2 / 0

Thread

3A27-109M N/A 14.600 mm N/A 11.900 mm N/A 21.800 mm N/A 12.500 mm N/A 5.100 mm N/A 7.130 mm N/A 7.500 mm N/A 2.500 mm N/A M3 x 0.5 – 4H5H
4A27-109M N/A 14.600 mm N/A 11.900 mm N/A 21.800 mm N/A 12.500 mm N/A 5.100 mm N/A 7.130 mm N/A 7.500 mm N/A 2.500 mm N/A M4 x 0.7 – 4H5H
5A27-109M N/A 14.600 mm N/A 11.900 mm N/A 21.800 mm N/A 12.500 mm N/A 5.300 mm N/A 7.130 mm N/A 7.500 mm N/A 2.500 mm N/A M5 x 0.8 – 4H5H
6A27-109M N/A 16.300 mm N/A 11.900 mm N/A 21.800 mm N/A 13.500 mm N/A 6.900 mm N/A 7.950 mm N/A 9.700 mm N/A 2.500 mm N/A M6 x 1.0 – 4H5H
8A27-109M N/A 18.000 mm N/A 14.300 mm N/A 24.200 mm N/A 14.300 mm N/A 8.500 mm N/A 8.740 mm N/A 10.700 mm N/A 3.300 mm N/A M8 x 1.25 – 4H5H
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1