MATERIAL : Aluminium alloy AU4G1 in accordance with TR 3823, heat treated for 120-145 HB.

SURFACE TREATMENT : Yellow anodizing in accordance with EN 2284.

CLASSIFICATION : 450 MPa (at ambient temperature) / 120°C.

THREAD :
  • PROFILE : ISO M in accordance with NFL 05220 or AICMA 0501A.
  • TOLERANCES : in accordance with NFL 05224 or AICMA 2011A.
TOLERANCES OF FORM AND POSITION : In accordance with ISO 8788.

MARKING : -SD in accordance with NFL 22036 on the area indicated on the drawing.

QUALIFICATION AND ACCEPTANCE CONDITIONS : NFL 22500 or AICMA 2053.

OPTIONS : Countersunk rivet holes as indicated on the drawing. Add code K after the reference (example : 5AJAL 103K). Nylon cap : Add code CN after the type of the nut (example : 5AJALCN 103). See CN-ISO-M..

Contact Alcoa for the diameter/type in manufacturing.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

A ±0.2

B - MAX

C ±0.1

F

H ±0.2

H1

H2 - MAX

J ±0.05

Thread

3 AJAL 103 N/A 18.000 mm N/A 7.000 mm N/A 6.000 mm N/A 4.700 mm N/A 3.600 mm N/A 2.000 mm N/A 3.200 mm N/A 6.000 mm N/A M3 x 0.5 – 4H5H
4 AJAL 103 N/A 24.300 mm N/A 9.500 mm N/A 8.500 mm N/A 4.700 mm N/A 5.300 mm N/A 2.800 mm N/A 4.800 mm N/A 8.000 mm N/A M4 x 0.7 – 4H5H
5 AJAL 103 N/A 26.000 mm N/A 11.000 mm N/A 9.500 mm N/A 4.700 mm N/A 6.000 mm N/A 3.500 mm N/A 5.500 mm N/A 8.000 mm N/A M5 x 0.8 – 4H5H
6 AJAL 103 N/A 29.000 mm N/A 13.000 mm N/A 11.000 mm N/A 6.000 mm N/A 7.000 mm N/A 4.200 mm N/A 6.200 mm N/A 8.000 mm N/A M6 x 1.0 – 4H5H
8 AJAL 103 N/A 33.500 mm N/A 18.000 mm N/A 13.000 mm N/A 6.000 mm N/A 9.300 mm N/A 5.100 mm N/A 8.500 mm N/A 8.000 mm N/A M8 x 1.25 – 4H5H
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1